Highly Stable, Resilient.
Dayton's DAYLube™ NanoCeramic Lubricating Grease is a leading edge, extremely high-performance lubricant that has a wide range of industrial applications. DAYLube™ utilizes nano ceramic particles that act as sub-microscopic "bearings," providing continuous lubrication to steel surfaces. DAYLube™ gives you ten times the normal life, a much lower coefficient of friction at all temperatures, extraordinary adhesion, and higher load-bearing properties than traditional high-performance greases.
DAYLube™ is a high-performance, highly stable lubricant that delivers unmatched performance, durability, and wear resistance.
DAYLube™ outlasts PTFE greases in the same applications by ten times due to its lower friction coefficient and its ability to operate at a wider range of temperatures!
Nano ceramic particles-the key component-offer a lower coefficient of friction at all temperatures.
DAYLube™ has high load-bearing properties; a low dielectric constant; does not contain metal or silicone; and is resistant to water, steam, acids, and most chemical products. All of this gives DAYLube™ greater staying power, even under intense pressure and temperatures.
- Food Grade-NSF-H1 Food Grade certified.
- Staying Power-extraordinary adhesion extends production to 10 times that of other greases.
- Shear Stability-does not soften or run out. After 100,000 production strokes, shows no evidence of breaking down.
- Operating Temperatures-operates in a normal range from 0° F to 450° F, and up to 650° F intermittently.
- Extreme Pressure & Anti-Wear Protection-resists EP, provides exceptional stability without using lead, antimony, chlorine, zinc, barium, etc.
- Corrosion Resistant-resists water, steam, acid, and other chemicals.
- High Dropping Point-maintains viscosity across full temperature range.
- Low Coefficient of Friction-lower than PTFE greases.
- Chemically Inert-environmentally friendly.
- Low Dielectric Constant-excellent insulator.
- Resilient-upon cooling returns to original viscosity after reaching dropping point.
A Better Way. A Better Value.
DAYLube™ is an extraordinary, state-of-the art lubricating grease. It provides exceptional friction reduction and wear resistance, and outlasts and outperforms virtually all other lubricating greases on the market.
It is also the best value on the market today.
When compared with the price of our closest competitor (using nanotechnology), the per ounce cost for DAYLube™ is considerably lower. Also, traditional PTFE lubricants are priced lower; however, the real value can be found in comparing the real life of the lubricants and considering the additional cost of maintenance and downtime.
DAYLube™ remains on the surface longer, extending production up to ten times that of PTFE lubricants. Further, DAYLube™ has much greater shear stability than other lubricants. In laboratory and on-site tests, the change in penetration after 100,000 strokes is low-meaning the grease did not soften under shear. Both longer run times and greater shear stability mean less total product cost, less maintenance, and far less downtime for lubricating.
In addition, DAYLube™ operates in a far wider range of temperatures than traditional lubricants, making it more versatile than PTFE products. For all practical purposes, you simply cannot purchase PTFE lubricants that will operate in this wide temperature range. Also, it is environmentally friendly.
Dayton products represent the best of the best, offering both top quality and outstanding value. DAYLube™ is no exception.
DAYLube™ NanoCeramic Lubricating Grease is ordered by quantity and product numbers. DAYLube is available in 16 oz. tubes, 16 oz. jars, 1 gallon or 5 gallon bucket. 16 oz. tubes and jars can be ordered individually or by the case.
|NLGF192||Case (dozen 16oz. Tubes)|
|NLGF192J||Case (dozen 16oz. Jars)|
|NLGF128||1 Gallon/7# Tub|
|NLGF640||5 Gallon/35# Pail|
Nanotechnology involves the development of materials, devices, and processes at the molecular level. In recent years, scientists have learned to fabricate molecules based on individual, task-specific designs. Today, nanotechnology is being used more and more to develop new, better, and more cost-effective products. One of those products is DAYLube™.
DAYLube™ - The Ultimate in Machine Lubrication
Key components in DAYLube™ are nano ceramic "bearings" that have an affinity for steel, and provide continuous lubrication at the surface. These are fabricated over a calcium sulfonate thickener within a mid-viscosity petroleum-based paste.
ASTME 4-Ball Weld Test
In laboratory tests, DAYLube™ performed extremely well over both standard greases and other so-called "high-performance" lubricants. The following criteria were used:
- 3 ball bearings submerged in grease
- 500kg pressure applied to center bearing
- center ball bearing spun at 10,000 rpm
- 10 seconds with "no weld" passing grade
In standard grease tests, results showed an instant weld and catastrophic failure of all 4 bearings. In tests with competitive brands, a soft weld occurred after 2 seconds, and there was a complete failure and major damage to all bearings.
Tests with DAYLube™ showed no weld after 10 seconds and minimal damage to all ball bearings.
|Grease Property||Grease Standards||Test Results||Performance Benefit|
|Shear Stability||ASTM D 217
Multi-stroke Penetration The lower the % change, the more mechanically stable the grease
|286||Grease won't thin out and break down, won't require frequent lubricating.|
|ASTM D 1831 Roll Stability
The lower the % change, the more mechanically stable the grease
|Oxidation Resistance||ASTM D 942 Bomb Oxidation
Measures the oxidative life of the grease. The lower the % the better the oxidation resistance.
|9%||Reduced deposit, varnish, or lacquer build-up on bearing or journal surface.|
|ASTM D 3527 Wheel Bearing Life
The higher the hours, the longer the grease will last in high-temperature applications.
|Water Resistance||ASTM D 1264 Water Washout
The lower the %, the less likely grease will wash out.
|Extreme Load & Anti-Wear||ASTM D 2596 Four-Ball (Weld Point)
Point contact, similar to ball bearings; the higher the #, the greater the load carrying ability, grease will stay in place longer.
|620||The ability of grease to handle extreme pressures and resist wear.|
|ASTM D 2266 Four-Ball (Wear Scar)
Measures the wear scar, the lower the #, the more protection.
|ASTM D 2509 Timken Method
Line contact, similar to roller bearings; the higher the #, the greater load carrying.
|Corrosion||ASTM D 1743 Rust Test (Static)
Determines how well the grease keeps water and corrosives away from the metal surface. 1A being the highest.
|1A||How well a grease can protect the metal surface from corrosion.|
|ASTM D 130 Copper Corrosion
Measures the ability of the grease to protect yellow metals.
|Service Temperature||ASTM D 2265 Dropping Point
Measures the temperature that the soap in the grease melts at; this is used to help determine the upper operating temperature range.
|600||The temperature at which the grease turns to a liquid.|
DAYLube™ can be used in all types of applications from general purpose to extreme pressure and temperature environments even in areas where incidental food contact may occur.
Applications include (but are not limited to) the following:
- Machine Parts
- Wear Plates
- Can Makers
- Consumer Goods
- Food Processing
- General Manufacturing
- Material Handling
- Medical / Scientific
- Motorsports / Racing
- National Defense
- Stamping & Fabricating
- Truck & Bus